& #8220; The operating system cannot start% 1 & # 8221; [Исправлено]

& #8220; The operating system cannot start% 1 & # 8221; [Исправлено]

System errors can occur from time to time, and many s have reported the ERROR_RELOC_CHAIN_XEEDS_SEGLIM error on their Windows 10 computers. This error is also accompanied by the message The operating system cannot start %1 and today we are going to show you how to fix it correctly.

Table of Contents

How to fix ERROR_RELOC_CHAIN_XEEDS_SEGLIM error?

Fix – ERROR_RELOC_CHAIN_XEEDS_SEGLIM

Solution 1. Completely remove antivirus software .

Having the right antivirus is quite important, but some antivirus tools may not be fully compatible with your system. Many s have reported that the ERROR_RELOC_CHAIN_XEEDS_SEGLIM error has appeared on their system due to Norton or McAfee antivirus software. If you have these tools installed, we strongly recommend that you uninstall them completely and see if that fixes the issue.

Be aware that many antivirus tools tend to leave residual files and registry entries that can interfere with your system even after the application has been removed. To remove an antivirus completely, it is recommended to use its specific removal tool. Many antivirus companies offer these tools for their software, so be sure to a special tool to remove your antivirus. Once you run the tool, all files and registry entries associated with your antivirus will be removed from your system.

After completely removing your antivirus software, check to see if the issue persists. As mentioned above, many s have reported Norton and McAfee as the main cause of this problem, but any other antivirus can also cause this problem.

Solution 2. Change your browser

Several s have reported that this problem occurs when trying to start Internet Explorer. According to them, the application failed to start due to a message The operating system cannot start %1 . As a possible solution, s are suggesting to switch browsers and see if that fixes the issue. Many s have reported that this solution works for them, so be sure to give it a try.

  • READ MORE: Can't files from internet on Windows 10 [Fix]

Solution 3: Run sfc checker

If you often get this error message, it may be because your files are corrupted. Sometimes your system files can be corrupted and this will cause this and many other errors. If this is the case, you should be able to resolve the issue by running an SFC check. This is quite simple and you can do it by following these steps:

  1. Click on Windows key + X to open the Win + X menu and select from the list Command Line () .

  2. After launch. Command line enters sfc / scannow and press Sign in .

  3. The scanning process will start. Please be patient while Windows scans for corrupted files and do not interrupt the scan.

Some s have reported that this solution works for them, so be sure to give it a try.

Solution 4: Remove problematic updates .

Installing the latest updates is important if you want your computer to be secure and stable. However, sometimes some updates may have some bugs or cause new problems. If this error started to appear after you installed a Windows update, it's likely that the update is causing the error. To fix the problem, you need to find and remove the problematic update from your PC. This is quite simple and you can do it by following these steps:

  1. Click on Windows key + I to open the “Settings” app.

  2. When opening Settings app , go to Update and security . Select the tab Windows Update Center and press update history .

  3. A list of all installed updates will appear. press remove updates .

  4. Find the recent update in the list and double-click it to remove it.

that Windows 10 tends to install updates automatically, so it is recommended that you the Show/Hide Update Troubleshooter. With this tool you can prevent problematic updates from being installed automatically.

  • READ MORE: Fixed: “Printer needs intervention” error

Solution 5. Reinstall Windows Media Player .

Windows Media Player is a basic component of Windows and the default media player on the Windows platform. Several s have reported that The operating system cannot start message %1 when trying to play an online video stream in Windows Media Player. To fix this problem, you just have to uninstall and reinstall the application by following the steps below:

  1. Click on Windows key + S and introduces windows features . Choose Enable or disable Windows features in the results list.

  2. Now the list of functions will appear. expand folder Multimedia functions and uncheck the box Windows Media Player . Press OK To save the changes.

  3. When you're done, restart your computer.

After you restart your computer, Windows Media Player will be removed from your computer. To install it again, repeat the same steps, but make sure to check the Windows Media Player option. After reinstalling Windows Media Player, the issue should be completely resolved.

Solution 6. Copy the postgreSQL DLLs to the System32 directory .

Several developers have reported this problem when using postgreSQL with PHP on their computers. To fix this problem, you have to postgreSQL and copy its DLL into the C:\Windows\N – System32 .

that this solution only applies to problems with postgreSQL, so if you don't have this application installed, you can skip this solution entirely. Also, copying the DLLs to the System32 directory can sometimes cause problems, so make sure you make a backup and be very careful.

Solution 7. Create a new profile .

Several s have reported that this issue occurs when clicking on links in Outlook, Skype, and Excel. If you are facing the same problem, you can resolve it by creating a new . Sometimes your may be corrupted and the only way to resolve this issue is to create a new one. To do so, follow the simple steps below:

  • READ MORE: “Application.exe has stopped working” error in Windows 10 [Fix]

  1. Click on Windows key + I to open the “Settings” app.

  2. Ir a s . Go to Family and other people in the left and tap Add someone else to this computer en Others on the right.

  3. Choose I don't have information for this person's entry .

  4. Now press Add a without a Microsoft .

  5. Enter a name for the new and press the button Next .

  6. After creating a new , switch to it and see if the issue persists. If not, copy all important files to the new and continue to use it as your primary .

Some s are also suggesting to make some changes to the registry. These steps are optional and if creating a new has resolved the issue, you can probably skip these steps. If not, you can try these steps:

  1. Sign in with your new .

  2. Go to directory C:\s .

  3. Find your old profile and rename its folder to your__name.old .

  4. Then press Windows key + R and enter regedit. press OK or press Sign in .

  5. Unnecessary: Changing the registry can be potentially dangerous, so we advise you to export the registry and make a backup. just go to File > Export. and select a secure location for your registration. In case something goes wrong, you can use this file to restore the registry to its previous state.

  6. In the registry editor, go to the key HKEY_LOCAL_MACHINE \N-SOFTWARE \N-Microsoft \N-Windows NT \N-ActualVersion \N-Profile List in the left .

  7. Unfold the key. Profile list and you will see some subsections available. Check all keys and find the value ProfileImagePath in the on the right. You have to find the key, the value of ProfileImagePath that corresponds to the location of your old profile.

  8. the last four digits of this key, in our example it is 1001 but on your computer it may be different, right-click the key and select Delete . Double check everything and make sure you delete the correct key. Removing the wrong key can cause problems on your PC, so be extra careful.

  9. Now go to HKEY_LOCAL_MACHINE \N – SOFTWARE \N – Microsoft \N – Windows NT \N – Current Version \N – ProfileGuid in the left and remove the key that has the same four digits that we mentioned in the previous step. In our example it was 1001, but it may be different on your PC. If you can't find this key, you can skip this step.

  10. Restart your computer and access your new . Now transfer the data from the old to the new one, if you don't already have it.

  • READ MORE: Disk Write Error: Access Denied with uTorrent [Fix]

In most cases, you just have to create a new and transfer your files to it, but if the problem still occurs, you may need to modify the registry as shown in the previous steps.

Solution 8 – Change the registry

If you have trouble opening the links and receive a message The operating system cannot start message %1 you can fix the problem without creating a new profile. To fix this problem, you will need to make some changes to your registry. To do this, follow the steps below:

  1. Run record editor as we showed you in our previous solution.

  2. Be sure to back up your registry before proceeding.

  3. Click on Ctrl + F and introduces 9BD02EED-6C11-4FF0-8A3E-0B4733EE86A1 или 6A0357B5-AB99-4856-8A59-CF2C38579E78 . Press the button More Information .

  4. If you find a key with C: \N – ProgramData \N – App-V \N – 9BD02EED-6C11-4FF0-8A3E-0B4733EE86A1 \N – 6A0357B5-AB99-4856-8A59-CF2C38579E78 \N – Root \N – VFS \N – System \N – ieframe.dll make sure to replace it with C:\N –windows \N –system32 \N –ieframe.dll .

  5. Repeat the search and substitute the values ​​as we have said in the previous step. You may have to repeat the search a few times to substitute all the values.

  6. After making the changes, restart your computer and check if the problem has been fixed.

that this solution is intended for experienced s, so if you decide to apply it, be very careful not to damage your Windows installation.

Solution 9 – Rename ssleay32.dll

This solution mainly applies to PHP developers who get The operating system cannot run error %1 on your PC. According to s, you can solve this problem by reinstalling PHP and all the necessary components. Also, some s suggest finding ssleay32.dll in the folder C:\Windows\N – System32 and change the name. that renaming files in the System32 folder can be potentially dangerous, so be very careful. After renaming the file, the problem should be completely resolved. This solution only applies to s who have PHP installed, so if you are not a web developer you can skip this solution entirely.

Solution 10. Change Skype Shortcut Settings

If you have this problem when you try to sign in to Skype, you can try adding launch options to a Skype shortcut. This is quite easy and you can do it by following the steps below:

  1. Make sure Skype is not running in the background. If it is, close it.

  2. Now find the shortcut Skype or Whatsapp , right-click on it and select from the menu Properties .

  3. Find the field. Goal o Starts at and adds /legacy after the quotes. Don't change the path inside the quotes. Click on Apply и OK To save the changes.

After making your changes, use this shortcut to start Skype. This is just a solution, but it works according to s, so be sure to try it. Please note that you will need to use this shortcut to start Skype each time you want to use it.

Solution 11. Stop the Apache service and copy the DLL files .

If you use WAMP and PHP on a local PC, you may encounter an error The operating system cannot start %1 from time to time. If you experience this issue, you should stop the Apache Bitnami WAMP service using the Stack Manager application.

  • READ MORE: "Close programs to prevent data loss" message in Windows 10 [Fix]

then copy libeay32.dll и ssleay32.dll de installdir/php/. в installdir/apache2/bin/strong. > directory. Finally, start the Bitnami WAMP Apache service again and check that everything is fine.

This solution is intended for web developers who have WAMP running on their computer. If you don't use this app, this solution won't apply to you.

Solution 12. Remove Developer Channel from Internet Explorer

According to s, The operating system cannot start %1 . Sometimes the error is caused by the Internet Explorer Developer Channel, so you need to remove it from your computer to resolve the issue. To do this, follow the steps below:

  1. Click on Windows key + I to open the “Settings” app.

  2. Ir a System and go to Apps and Features . A list of all installed apps will appear. Select the Internet Explorer development channel and press the button Delete to delete it.

You can also remove this app by following the steps below:

  1. Click on Windows key + X and select from the menu Programs and components .

  2. A list of all installed apps will appear. Find Internet Explorer Developer Channel and double click on it to remove it.

If you don't have the Internet Explorer Developer Channel, you can resolve this issue by installing it and then uninstalling it by following the instructions above. You can the Internet Explorer Developer Channel from the Microsoft website. After uninstalling the app, the issue should be completely resolved.

Solution 13. Update the libeay32.dll and ssleay32.dll files

Another solution, which may help web developers who have this problem with PHP, is to update the files libeay32.dll и ssleay32.dll . Simply these latest PHP package files and update them and the problem should be resolved. Alternatively, some s are also suggesting to update php_curl.dll So you can also try it. This solution only applies to PHP developers, so if you don't use PHP, this solution does not apply to you.

ERROR_RELOC_CHAIN_XEEDS_SEGLIM and The operating system cannot start %1 . The errors can cause a lot of problems on your PC, but you should be able to fix them with one of our solutions.

Read more:
How to Facebook stories from PC