How to fix the "Cannot access the site" error in Opera

How to fix the "Cannot access the site" error in Opera

Method 1: Check site availability

If you only have one website that's down, don't worry: it's not uncommon for the servers that host them to have momentary crashes and other problems. Just wait a few minutes and try again. It also happens that the site is not open for a longer period, for example, for a day, due to technical or other problems. You can use special websites to monitor the availability of a certain URL and one of these online services can be found at the following link.

Go to 2IP to check if another site is accessible

Enter the URL that is not accessible in the unique field and click "Define"..

2IP will try to access this site via IP addresses in different countries, and the results here are 3:

  • No access - this means that the site is completely 'down' for all countries. In this case, you have to wait for it to be operational again.
  • Access is partial: the site is most likely down due to internal problems with the servers in some of the countries where they are located. Again, you don't need to do anything, just wait.
  • The access is there - the site is working, but for some reason your computer cannot open it. To discuss this, go to the following Ways and Means articles, starting with 3.

Method 2: Check Internet Availability

The main thing is to check the availability of the Internet as such. Try opening a few different sites to see if some of them are accessible or if there is no network access at all. Launch another web browser - even the one built into your operating system will do this - and start opening the most popular sites there.

  • If there is no Internet on the computer and the corresponding icon appears in the taskbar tray, check the physical connection.
  • Check that the LAN cable is connected correctly, and if you are using Wi-Fi, if the module is turned on.
  • Look at the router - it should have all the lights that were on before when the network was present.
  • Disconnect the LAN cable from the router and connect it directly to the PC / laptop unless you are sure the router is not the cause of the problem.
  • If the checks reveal nothing, look for the problem already on the connection side: it is probably a momentary ISP failure. Wait a bit and the company's technical service.

Read also:
How to solve the problem that the Internet does not work on a PC
Checking the router to see if it works.
Solve Internet Cable Visibility Issues With Your Router

Method 3: Activate the VPN

This recommendation is only relevant in situations where there is no access to a specific site that worked well before and that, judging by checking with the first method, works now. It has probably been blocked by your country's ISP or you can only access it through IP addresses in other countries due to other reasons. It is not difficult to mask your IP: you just have to activate the VPN application, which is built into Opera or which you can choose yourself. In our individual articles you will find all the necessary information on this topic.

Read More:
How to by website blocking in Opera
Free VPN installation on your computer

Method 4: Disable third-party programs and extensions

Some programs affect your Internet connection. Most of them are VPNs in the form of independent OS applications or browser extensions. s of this type of software can accidentally connect to some country whose IP is included in the list of banned sites, so an attempt to open a specific URL ends with an error. Or they just have a bad server, whose connection speed is too slow and it can't connect. Close any program that affects the Internet in one way or another and access the desired site again.

To avoid deactivating extensions, simply open an incognito session in Opera - no extension is active in it by default, unless of course you have manually activated this feature in each of its settings.

Read also: Enable incognito mode in Opera browser

If sites load normally in incognito mode, go to "Menu". > "Extensions".> "Extensions". and deactivate the active extension one by one, after each of them access the previously inaccessible sites.

Also, it's worth noting that Opera also has a built-in VPN extension, so don't forget to check its status and also disable it to check access to sites.

Opera's built-in VPN works in incognito mode too, keep that in mind. It often blocks Internet access if it works in conjunction with, for example, a VPN program running on your computer.

Method 5: Change DNS settings

Due to Internet recommendations or to change the IP address without using VPN software, some s change the DNS settings in the operating system. Also, these settings can be prescribed without your knowledge, like viruses, and these kinds of things are not uncommon.

To confirm or reject this assumption, go to the properties of your network adapter and find out your DNS settings.

  1. Ir a "Control ".. To do this, just start typing the name of the application in "Start"..
  2. This is where you want the section "Center network and sharing" (if category browsing is configured, you will find this item in "Network and Internet)".
  3. In the left part of the window, open the section "Change adapter parameters.".
  4. Find your internet connection. For a LAN (wired) connection, in most cases it is called "Ethernet".When connecting via Wi-Fi - "Wireless network".. Right-click and select "Properties"..
  5. Find the component "IP version 4 (T / IPv4)" (A small part of modern Internet connections use IP version 6, but you probably still have version 4), mark it with the mouse and go to "Properties"..
  6. See what is explained in the section with DNS. Today, most ISPs do not ask s to enter this data, so normally the configuration should be in the state "Obtain DNS server address automatically.". If your ISP gave you a connection sheet or card, find it and enter the IP and DNS manually.
  7. Some s have entered the DNS for the proxy in these fields themselves, and they may have stopped working. Google or Yandex DNS is also popular with s, but if they have any kind of problem, some sites may not open and others will do so without a problem. Therefore, if you do not want to give up the DNS of the selected search engine, you only have to temporarily switch to an automatic setting. If you do not enter anything here, and you do not have data for the connection, also, activate the DNS server for automatic reception.
  8. We recommend writing down the addresses just in case, or taking a screenshot of the window, so that you can retrieve these addresses at any time. After saving the changes, it is better to restart the PC.

The same is true for routers: if you have recently logged in and made any changes, especially in the DNS section (such as when configuring DH), undo it.

It makes sense to clear the DNS cache and routing table of the gateway entries. To do this, do the following:

  1. Open "Symbol of the system". o "Windows PowerShell". (whichever is more convenient) with privileges. This can be done by right-clicking on "Start". (on Win 8/10) or, for example, looking at "Start"..
  2. Write a command ipconfig /flushdns and press I went into to run it.
  3. Do the same with the command route –fwhich clears the route table.
  4. You can also use the commands netsh int reset all, netsh winsock resetwriting them in consecutive order and after each one by pressing I went into. This will reset your T / IP protocol settings and will sometimes help you access some or all of the sites.
  5. After interacting with the console, you must restart your computer.

Method 6: Check for Viruses

It is not uncommon for a virus that has infiltrated your computer to prevent you from accessing the Internet, somehow blocking this function. If you have an antivirus installed, perform a full system scan, and if you don't, you will have to use another computer or even your phone to an antivirus program.

Today, no-install scanners are successfully fighting viruses, so you can run them directly from a flash drive or by transferring an EXE file from your phone, for example via USB. In our other article, we talk about which ways are most effective to combat malicious software.

More information: Fighting computer viruses

Method 7: disable security software

Sometimes it is not viruses that block Internet access, but antivirus, oddly enough. For example, this sometimes happens with Windows' built-in firewall.

This window, as shown above, may not appear for all s, causing Internet access through Opera to be blocked, while other browsers open any URL. Stop it, start Opera and start accessing some sites.

Read more: Disabling Firewall in Windows 10 / Windows 8 / Windows 7 / Windows XP

If you are using a third party firewall, disable it as well. It is recommended to do the same with different antivirus, including the built-in one.

Read More:
Antivirus deactivation
Disabling Defender in Windows 10 / Windows 7

If that doesn't help, don't forget to re-enable all antivirus programs.

Method 8: View connection properties

You still need to check a browser property setting that is changed infrequently.

  1. Reopen it. "Control ". and find the category "Browser properties"..
  2. On the tab. "Connections." press the button "Network settings"..
  3. Make sure the checkbox is checked to "Automatic parameter detection".and the article "Use a proxy server for local connections" He is not present. Make changes if necessary.

When distributing mobile Internet to your computer, you may not be able to access websites because your operator monitors and blocks such connections. However, other programs such as Skype may work, but browsers cannot.

We are glad that we have been able to help you with your problem.

Describe what has not worked for you.
Our specialists will try to respond as quickly as possible.

Has this article helped you?