Megafon USB Modem Configuration

MegaFon company modems are very popular with s as they combine quality and moderate cost. Sometimes such a device requires manual configuration, which can be done in special sections through the official software.

Set up a MegaFon modem

For the purpose of this article, we will look at two variants of the program "MegaFon Modem."The software has significant differences in of appearance and available functions. The software has significant differences both in of appearance and available functions. Any version is available for from the official site on the page with the specific modem model.

Go to the official website of MegaFon

Option 1: Version for 4G modem

Unlike previous versions of the Megafon modem software, the new software provides a minimum number of parameters for network editing. At the same time, in the installation phase it is possible to make some changes to the configuration by checking "Advanced settings".. For example, this will ask you to change the folder during the software installation.

1. After the software installation is complete, the main interface will appear on the desktop. To continue, make sure to connect your MegaFon USB modem to your PC.

   After the compatible device has been successfully connected, the basic information will be displayed in the upper right corner:

   • SIM card balance;
   • Name of the available network;
   • Network speed and status.
2. Switch to tab "Settings".to change the basic settings. If there is no USB modem, there will be a notification in this section.
3. If you wish, you can activate the PIN code request each time you connect to the Internet again. To do this, press the key "Enable PIN" button and specify the necessary data.
4. In the drop-down list. "Profile of the network". select «MegaFon Russia». Sometimes the desired option is indicated as "Car".

   When creating a new profile, it is necessary to use the following data, leaving "Name". и "". empty:

   • Qualification -. "MegaFon";
   • APN - "Internet";
   • The access number is ... "* 99 #".
5. In the block. "Mode". You can select one of four values ​​depending on the capabilities of the device in use and the coverage area of ​​the network:
   • Automatic selection;
   • LTE (4G +);
   • 3G;
   • 2G.

   The best option is. "Automatic selection".since in this case the network will adjust to the available signals without disconnecting the Internet.

6. When using the automatic mode in the "Network selection". you do not need to change the value.
7. At your discretion, check the boxes next to the optional items.

To save the settings after editing, you must terminate the active Internet connection. This concludes the procedure to configure the Megafon USB modem through the new version of the software.

Option 2: 3G modem version

The second option is relevant for 3G modems, which are currently impossible to acquire and are therefore considered obsolete. This software allows you to configure the operation of the device in more detail on your computer.

Style

1. After installing and starting the software, click "Settings". and on the line "Change skin." Select the option that is most attractive to you. Each style has a unique color palette and a different arrangement of elements.
2. To continue customizing the program, from the same list, select "Basic"..

Basic

1. On the tab. "Basic". you can modify the behavior of the program at startup, for example, by configuring the automatic connection.
2. Here you can also select one of the two interface languages ​​in the corresponding block.
3. If there is more than one compatible modem connected to the PC, in "Device selection". you can specify the principal.
4. Optionally, you can specify a PIN code that is automatically requested each time a connection is made.
5. The last block in the section "Basic". es "Connection type".. It is not always displayed and in the case of MegaFon 3G-modem it is better to choose "RAS (modem)" or leave the default value.

SMS client

1. In the page "SMS client". allows you to enable or disable notifications for incoming messages, as well as change the sound file.
2. In the block. "Preservation mode". must be selected. "Computer".so that all SMS are stored on the PC without filling the memory of the SIM card.
3. Options in. "SMS Center". it is better to leave it as default to send and receive messages correctly. If required "SMS center number". to be clarified with the operator.

Profile

1. Normally in section "Profile". all data is set by default for the network to function properly. If your internet doesn't work, press the button "New profile". and fill in the provided fields as follows:
   • Name - anyone;
   • APN - "Static.";
   • The access point is ... "Internet";
   • The access number is. "* 99 #".
2. Strings "name". и "". should be left blank in this situation. On the bottom press the button "Save".to confirm creation.
3. If you are well versed in internet settings, you can use "Advanced settings"..

Red

1. With the help of a section "Net". In the block. "Guy". changes the type of network used. Depending on your device, one of the values ​​is available:
   • LTE (4G +);
   • WCDMA(3G);
   • GSM(2G).
2. Parameters "Registration mode". they are designed to change the type of search. In most cases you should use "Automatic search"..
3. If you have chosen "Manual search".available networks will appear in the lower field. These can be the following "MegaFon".and the networks of other operators in which you cannot without a suitable SIM card.

To save all the changes made at once, press the key. "OKAY".. This completes the adjustment procedure.

Conclusion:

Thanks to the guide presented, you can easily configure any MegaFon modem. If you have any questions, write us in the comments or read the official instructions for working with the software on the operator's site.

Has this article helped you?